Fighting Mold At Home

2024 Author: Gavin MacAdam | [email protected]. Last modified: 2023-12-16 13:38

Mold and mildew on porous ceilings and walls look very unsightly. In addition, they greatly harm human health and can irritate the skin, mucous membranes, and also cause allergies

The best way to get rid of mold is prevention: keeping the room clean and humid. If it does appear, then you can call special services to eliminate such problems.

Or purchase industrial remedies for the fungus. But it is important to fully follow all the instructions that come with them. Do not neglect goggles, masks and gloves. But you can still try to get rid of mold and mildew with improvised, folk remedies, of which there are many.

1. Drying the room

In order for mold and mildew to spread quickly, they need a humid environment, which is often found in kitchens and bathrooms. To avoid their appearance, you must:

- Use a special air dryer;

- Eliminate the leakage of plumbing;

- Maintain dryness in hard-to-reach places;

- Thoroughly ventilate the premises every day;

- Do not leave towels wet, but dry them promptly.

2. Air purification

It is imperative to use a good cleaner and special filters to keep mold and mildew out.

3. Application of tea tree oil

This wonderful oil will allow you to get rid of many forms of mold in the shortest possible time. It is necessary to add about 10 drops of oil to the water and spray the affected surfaces with the resulting mixture. It is important to shake the liquid well before use. Grapefruit seed extract also cleans up the fungus well. It can be used in the same way as tea tree oil.

4. Application of vinegar

An excellent natural cleaner is white vinegar. It will not only allow you to rid the kitchen and bathroom of mold and mildew, but also clean and disinfect the whole house well. White vinegar is a natural antimicrobial agent. Having poured it into a spray bottle, you need to spray it on problem areas in the rooms, and after a few minutes wipe them with a clean and dry cloth or sponge.

5. Using distilled ethanol

Vinegar smells specifically, so distilled alcohol can be an alternative to it, which also fights mold well.

6. Performing compacted grouting of tiles

In order to subsequently prevent the appearance of fungus or mold, it is necessary to carry out a thorough grouting of the surfaces and the most dense laying of tile materials.

7. Application of baking soda

- As a completely natural and safe cleaner, baking soda is also used effectively to get rid of fungus. It removes all dirt remarkably and effectively fights mold fungi. Unlike store-bought chemical cleaners, this is an environmentally friendly, mild product that perfectly absorbs excess moisture, which is the cause of fungus. Soda also deodorizes the air well and removes unpleasant odors. Usually, take half a spoonful of baking soda and dissolve in a glass of water. Then all this is sprayed onto the damaged surface.

You can do otherwise: moisten the fabric well in water, sprinkle abundantly with soda on it and wipe the moldy surfaces with it.

8. Surface treatment with ammonia

You can clean problem areas with mold with ammonia. It will be a good helper in the fight against mold on porous, plasterboard and wood surfaces. But it is important to remember that this is a toxic substance, and you need to handle it with the utmost care. The ammonia is mixed in equal parts with water, after which the resulting liquid is sprayed onto the place where the mold has appeared. It's no surprise that ammonia is included in many anti-mold products.

9. Use of hydrogen peroxide

Hydrogen peroxide has long been considered a fairly effective remedy for fighting fungus and mold. This tool effectively deals with various viruses and bacteria. Peroxide is a well-known alternative to unsafe chlorine bleaches that does not cause the slightest harm to the environment and does not leave behind gases and toxic substances.

A 3% hydrogen peroxide solution will help remove molds not only from surfaces, but also from clothes. This product will effectively whiten surfaces and remove unpleasant odors. For ease of use, hydrogen peroxide is poured into a spray bottle and carefully sprayed over the damaged areas, leaving for about 10 minutes. After that, the remnants of the product are removed with a clean cloth or sponge.