2024 Author: Gavin MacAdam | [email protected]. Last modified: 2023-12-16 13:38
Vapors, high temperatures, fatty deposits in the kitchen and humidity in the bathroom are aggressive specifics of these spaces. Special finishes are required for walls and ceilings. If you are planning an economical repair, give up the tiles and use plastic panels. This material is practical, reliable, aesthetic, resistant to negative environmental influences and detergents. Plastic panels are indispensable for decorating a country house. We will talk about the rules of selection and installation today
How to choose plastic panels
Popularity and high demand always stimulate manufacturers to saturate the market with a large assortment. Often this abundance confuses us, and we find it difficult to choose. In the store, we see panels of different thickness, size, shade, plastic density. Which ones to choose?
The main criterion for determining quality is the surface. Carefully consider the area of the sheet, it should be even, without wavy lines, sagging and distortion of the horizon. These defects are clearly visible when viewed from an angle and from different angles. If you have chosen a suitable option, do not limit yourself to examining one sample from the showcase. Ask for two or three more from this batch.
An important point is strength. To check, press firmly with your finger in 2-3 places on the front side, the dents that appear indicate low quality. Swipe with a fingernail or a coin - there are scratches, too bad. The panel, which is easily scratched and broken with a slight bend, will not last long, will quickly lose its attractive appearance, lose its gloss, and there will be difficulties during installation.
Check the quality of the joint: try to connect a pair of panels. This action will help determine if there are deformations and bends. It is always better to choose a thickness of 8-10 mm, the length will depend on the area of the room 6; 3; 2, 7 m. If all tests are successful, make sure that all the goods are assembled from one batch, as it is possible that differences in thickness or color saturation will be noticeable during finishing.
Types of plastic panels
Each choice is individual, there are many options for this. Plastic panels differ in coating quality:
• glossy, • matte, • printed drawing, • glued film with a picture.
Plates are divided into wall and ceiling, although the difference is only in size and thickness, for ceilings they make 4-7 mm, for walls - 7-10. The main difference is the type of docking, of which there are three options:
1.
Seamless. The grooves are designed so that the docking is practically invisible. They fit snugly, but difficulties arise during operation, since due to improper storage, bends appear that prevent smooth joining. For seamless panels, a specially leveled frame is required.
2.
Embossedimitating lining. The seam line is a decorative element. They are the cheapest and most practical for a country house. At the joints there are several millimeters of the gap, which makes it possible to hide the moments of "seasonal walking" of the foundation, changes in load-bearing structures and walls.
3.
With rust - an averaged design, between the two types of connections described above. They are rare, 38 cm wide.
We mount plastic panels
Installation is carried out in two ways: on a frame or on glue. The frame base makes it possible to remove wires or pipes into the resulting space - this is a plus. The installation of the frame should take place taking into account the location of the future holes. The required hole is cut for sockets / switches, the main elements are fixed to the wall.
The lathing is made of slats that are perpendicular to the length. For walls, the step is maintained 40 cm, for the ceiling - 30. Fastening to a wooden wall is carried out on self-tapping screws, in concrete on a dowel-nail.
The next step is to install the panels. For this, a stapler, self-tapping screws, clamps are used. When the entire surface is "sewn up", proceed to decorating accessories. The corners are closed with internal and external overlays, the plinth is mounted.
Useful Tips
The panels must be adapted to room temperature (stay in the room for at least an hour). Do not remove the protective film before installation. In the course of work, achieve a tight fit into the grooves, avoid the initial skew.
Structures made of a frame assembled from a mounting profile will be more durable, and the panels are fixed with fasteners-clips. Adjust the height while leaving a gap at the ceiling and floor. For soundproofing, an appropriate material can be placed in the crate.
In places of direct contact with water, achieving complete waterproofness, the joints are coated with sealant / silicone. All slots are made on the front side. The trim is attached with liquid nails. It is not recommended to use abrasive substances, solvents and coarse scouring pads when washing.
Recommended:
How To Equip A Kitchen In The Country
Every summer resident wants to have a comfortable, cozy kitchen: convenient for cooking, eating, conducive to rest, communication, with the opportunity to meet guests. A small house greatly complicates the creation of normal conditions, some do not have them at all, but get by with a table on which there is an electric stove. Such marching conditions lead the hostess into a stupor and are incomparable with the ritual of cooking. Now you will learn how to equip a kitchen in the country, even if there is very little space
Hall And Kitchen Phytodesign
The first impression of the apartment begins to form from the hall and the adjacent kitchen. It is these premises that set the tone for the entire interior of the apartment. Choose a light and calm background of the walls, pastel, contrasting color spots are allowed, but in small quantities, they should be in harmony with the plants
Helpers In The Kitchen - Helpers And In The Garden
Recently, we have all begun to try to take more care of our health and the health of our loved ones and reduce the use of chemicals to a reasonably possible level in order to get environmentally friendly products that are not scary to give even to the smallest family members. Therefore, we often resort to folk remedies: various herbal infusions, compost, home first-aid kit items. But do not forget about kitchen helpers: garlic, mustard, salt, sugar and kefir - after all, they are wonderful too
Types Of Panels And Interior. Manufacturing Methods
An eye-catching decoration on the wall that serves as an exquisite decor is a wall panel. Handicraft is the pride of the owners. The choice of material and location depends on a number of factors. Consider how to correctly position and what to make a panel for the wall
Cladding Sheets And Types Of Their Coatings In Sandwich Panels And Their Installation
Several rigid materials can act as lining of sandwich panels. PVC sheets are distinguished by their thermoplasticity, as well as very low weight and chemical resistance. These sheets will not burn in air. Most often, such sandwich panels are used indoors. This is due to the fact that PVC sheets are characterized by low resistance to frost and these sheets will be highly susceptible to mechanical damage