Garden Logistics. Part 3

Table of contents:

Video: Garden Logistics. Part 3

Video: Garden Logistics. Part 3
Video: Сад Летиции Часть 3 (вариант гобелена) 2024, September
Garden Logistics. Part 3
Garden Logistics. Part 3
Anonim
Garden logistics. Part 3
Garden logistics. Part 3

An unusual solution for your garden may be to lay a path from wooden saw cuts. Various types of wood will come in handy. This "path" looks very original. To create such a path, the soil is removed. The earth is dug up to a depth of 15 to 25 cm, sand is poured into it, each layer of which is watered. Further, wood cuts are laid in the prepared niche. Their height should be from 10 to 20 cm. The resulting gaps are covered with sand. Before you take wood cuts into work, you need to process them. For example, those parts that will be underground must be treated with a product that protects the coating from moisture, and therefore from decay. Further - the material is smeared. Following some simple recommendations, you can extend the life of the path network for many years

The so-called step-by-step garden paths look beautiful. They are smashed right on the lawn. First, think about the size of the "steps", as the grass needs to be cut to fit the size of the tile. The material can be installed on sand or gravel, but with the proviso that it must be below the level of green spaces. In this case, there will be no problems with mowing the lawn. Alternatively, you can place this version of the track on a sandy pillow. Why the formed seams are covered with earth, in which the lawn grass will grow. In this case, the distance between the centers of the plates should remain about 60-65 cm.

Another option is an embankment. Its advantage is overdecoration. At the same time, it completely permits moisture. They are created, first of all, for the sake of beauty. The components used are varied. These are pebbles, stone chips, gravel, granite or marble screenings, bark is also suitable. You can imagine how the path will look “in nature” using the most common irrigation hose. Divide it into sections. Bending where necessary. Mark the edges with paving slabs, spreading them along the edges. For the future path, it is necessary to remove a layer of earth - about 5 cm. Drive curbs flush with the lawn along the edges. Next, a spunbond must be placed on the bottom of the recess. And already on top of it, you can fill in the coating. The embankment must be fenced off with a curb, since crushed stone and gravel can "creep" out of the bounds, and the bark - scatter from the wind.

When decorating your garden, you can give preference to combined paths. This is where a flight of imagination comes in handy! You can create them using various materials. At the same time - to combine them in size, color and similarity in materials, or vice versa - to create a path based on contrasts. In addition, you can use the same material in this case, but in different colors. It is also possible to create by combining large and small slabs of clear dimensions with, for example, round or irregular shapes. Also, elements can be from a variety of materials.

In order to determine which of the above garden paths is best to implement on your site, once again take a look at the area next to your house or summer cottage. Think about which parts of the area are functional and you will use the most. And which ones - on the contrary - you rarely use and it is more logical to lay beautiful combined paths to them, which will be intended not so much for movement, but for the joy of your and those around you. An important factor is the financial capabilities of your family and how much money you are willing to spend on the placement of the transport logistics of your garden. Armed with the knowledge provided above, you can easily carry out all your plans. After all, you can break the network of garden paths on your own in your free time.

Recommended: