DIY Drip Irrigation

2024 Author: Gavin MacAdam | [email protected]. Last modified: 2023-12-16 13:38

In this case, the drip irrigation system seems to be a very profitable option. At first glance, it seems that such a system is a very complex mechanism, but in reality this is far from the case

Actually, the very essence of such an irrigation method is that water will flow directly to the roots of the plants themselves. This is the main advantages of the drip system over all the others. After the water enters the roots of the plants, it is instantly absorbed, then the plant will use this water at its full capacity for its needs. Now, thanks to such an irrigation system, it can be carried out during the special sun. After all, water will not get on the leaves of plants, and accordingly there will be no sunburn.

Next, we will talk about the components of a drip irrigation system. First of all, it should be noted that droppers, which will be installed in the immediate vicinity of the plant, gradually supply liquid to the plant roots. There are several types of such droppers: non-collapsible and collapsible, adjustable and non-adjustable, end and straight-through. Regulating droppers will make it possible to change the water flow depending on the need, while flow-through droppers will be installed in the place of pipeline ruptures.

The delivery hose and switches are other important components of such a system. As for the master block, it is he who will supply the system with water.

There are also such drip irrigation systems, where drip tapes serve as a replacement for droppers, which will also be attached to the hose. Drip tapes are thin tubes with holes that will be spaced 15-30 centimeters apart. If you choose such a system, then you will need to use nozzles at the end of each such tape, which is necessary to stop the water in time.

In order to make the use of such a system more convenient, it is recommended to arrange the plants on the beds in such a way that those that are located close to each other would need the same amount of moisture.

DIY drip irrigation system

So, it is quite possible to make such a system on your own, which will significantly save your financial resources. In fact, such a system can be called an analogue for the well-known medical dropper. To make a drip irrigation system, you will need: hose, filter, plug, medical dropper.

First of all, small holes should be made in the hose, which is connected to the existing drainage system. This can be done using a conventional awl, and medical droppers should be inserted into such holes.

It should be remembered that you should not forget about installing the filter, which must be done even when attaching the hose. Any filter that fits the size will do.

After that, you should put a plug on the end of the hose. Such measures will prevent unwanted water leakage. Actually, after that the whole system is already ready for use. After that, all that remains is to lay the tubes under the plants. With the help of a tap, you can adjust the intensity of the water supply.

In order for the system to serve for a long time, we must not forget about regular filter replacement. The frequency of such events will depend on the volume of suspended matter in the tap water and how contaminated it is. By the way, this irrigation system can also be used when watering flower boxes in the house.

Of course, this homemade drip irrigation system will differ in its properties from its proprietary counterparts. However, making it is very simple. Therefore, the costs of manufacturing such a system will be very low; in fact, such a system can be installed a new one every season.