How To Get Rid Of Rust On Garden Tools?

Table of contents:

How To Get Rid Of Rust On Garden Tools?
How To Get Rid Of Rust On Garden Tools?
Anonim
How to get rid of rust on garden tools?
How to get rid of rust on garden tools?

Not a single summer resident can do without good garden tools. If you learn to take care of him properly, he can serve for more than a dozen years! And if you neglect proper care, then under the influence of various atmospheric phenomena, garden tools can easily become rusty. However, coping with it is also quite realistic, the main thing is to know how exactly this can be done! And this can be done in several different ways

Citric acid solution

A three percent citric acid solution helps to cope with rust on garden tools very well. Citric acid is especially suitable for the preparation of very impressive volumes of solution intended for cleaning too large parts. All the necessary parts are soaked in such a solution for several hours, after which they are rinsed abundantly with clean water.

This method should never be used to clean engine blocks or brakes - after contact with citric acid solution, they may become brittle. And buying citric acid will not be difficult at almost any grocery or wine store. However, you can clarify the fact of its presence in any agricultural store, because citric acid is often used by swineherds, and if you buy it in large quantities, it may be cheaper.

Weak vinegar solution

Image
Image

If you find the slightest signs of corrosion on garden tools, it is recommended to soak all metal parts of this equipment for a day in a weak vinegar solution (in this case, vinegar is diluted with water in a 1: 1 ratio). For these purposes, the most inexpensive white vinegar is fine. After a day, the metal parts are removed from the solution and, after wiping them thoroughly with a paper towel, they begin to clean off the rust with a small metal washcloth. If the blades and other parts of the garden tools are too rusty, it is possible that after removing the first layer of rust, they will need a second soak.

Cola or strong black tea

You can also get rid of rust on garden tools with the help of cola or strong black tea - first, the tools are soaked in them for several hours, and then they begin to remove rust from them with a metal washcloth or a clean cloth. You can also use flattened aluminum foil soaked in a little water to remove rust.

What is important to consider when removing rust?

When removing rust from the surface of your garden equipment, it is important to try to minimize the amount of scrapings. It is best to get rid of corrosion with light circular motions - this is the best and surest way to avoid scratching or thinning of the metal.

Image
Image

During the elimination of rust, it will not be superfluous to put on protective gloves, a mask and goggles. And it is also worth straining your memory and trying to remember when the last tetanus vaccine was given - injuries resulting from damage to the skin with rusty objects can lead to this very unpleasant disease.

How to avoid rusting?

In order to avoid the appearance of rust, all garden equipment must not only be cleaned in a timely manner, but also provide it with reliable protection from moisture ingress. Cleaning your garden tools regularly and thoroughly is the best way to prevent rust formation. Do not leave them wet for a long time, especially on the street - under the influence of various atmospheric phenomena, rust forms much faster and more often. And before you send the garden tools for storage in the barn, it must be thoroughly dried. Compliance with these simple rules will help you not to face such an unpleasant phenomenon as rust much longer!

Recommended: