5 Ways To Upgrade Your Kitchen Unit

Table of contents:

Video: 5 Ways To Upgrade Your Kitchen Unit

Video: 5 Ways To Upgrade Your Kitchen Unit
Video: 5 Super Easy Hacks To Upgrade Your Kitchen 2024, May
5 Ways To Upgrade Your Kitchen Unit
5 Ways To Upgrade Your Kitchen Unit
Anonim
5 ways to upgrade your kitchen unit
5 ways to upgrade your kitchen unit

If, when planning the budget, the item on replacing furniture is not included, but there is a desire to redo, transform the kitchen set and refresh the atmosphere, what to do? There are effective ways to upgrade at minimal cost

Restoration with self-adhesive film

A radical change in appearance can be easily achieved by using self-adhesive film. The assortment of this product is so great that everyone can choose the option that suits your interior. The new surface will have an imitation of wood, matting, stone, fabric, patterns, etc. For this you do not need to remove hanging shelves, move tables and cabinets. The work is done on site.

Image
Image

The amount of material is selected depending on the work ahead. If only the facades will be updated, measure these parts. One roll is usually enough for a small headset. By the way, it is more convenient to work with a narrow film, so choose a width of 50 cm.

The film is intended for flat surfaces. If the doors have embossed edging, then they do not need to be used. Clean the selected areas from dust and dirt, degreasing and washing are optional. The work is carried out in stages with each detail. Measure out the desired piece, peel off a small piece of backing paper and attach evenly to the edge of the surface. Further, gradually separate and at the same time iron with a dry cloth in the middle, towards the opposite edge.

If wrinkles appear, you can tear off the problem area and re-stick it. Prick the resulting swellings / bubbles with the sharp tip of a knife or needle and smooth out thoroughly. With certain skills, you will spend about two hours at work.

Complete replacement of the facade

This method requires certain costs and efforts, as a result, the furniture on the front side becomes completely new. The course of such an event consists of dismantling old doors, removing accessories.

To work, you need a drill with a hole drill. They will need to drill holes for the hinges, since all purchased facades do not have places for fastening. Professional skills are not needed here, it is important to make the markup correctly. It is better to use new fittings.

Image
Image

Application of decorating moldings, overlays

An effective and easy way to decorate cabinet furniture is to use moldings. These are curly, embossed, textured or profile overlays made of polymer materials. Used to update the design of old headsets. Helps to protect corners, is used to frame inserts and edging. They help to harmoniously integrate new finishing materials into the facade panel.

Experts recommend making a sketch before work, and then marking the attachment points on the surface. If the molding will be attached end-to-end, then you need to cut exactly, at the required angle. It is unacceptable to leave roughness and notches at the edge of the cut. For ease of installation, it is advisable to detach the doors from the hinges, lay them on a flat surface and only then stick the decorating elements.

Use of ceramics

Image
Image

On the front panels of the doors, you can make inserts of thin tiles. It is not necessary to lay out the entire surface completely - this will make the door too heavy, it is enough to place several pieces on all open parts of the facade.

An ornament / mosaic made from cut or broken pieces will look unusually interesting. Fastening the tile is quick - glue is applied and pressed firmly. To give a finished look, it is recommended to frame with a frame made of strips or flat moldings.

Rattan inserts

Image
Image

Rattan is a dense material with a textured surface made of wood or artificial materials. It is sold in the form of a canvas or slabs with a glossy / matte finish, has a rich color range.

Furniture with rattan inserts has a presentable look. The installation of the polymer canvas is carried out on PVA glue, but with natural material it is more difficult. To give elasticity, it is soaked for half an hour, then only the desired size is cut off. Attached to the door with a stapler. The clips are closed with a trim strip. Rattan inserts in the middle of the doors will transform any kitchen set.

Recommended: